【Product Introduction】：JJF flotation cell is a air self-suction mechanical stirring floatation cell without slurry suction (Referring to the design of USA wemco flotation machine)
【Applicable Materials】：JJF mechanical agitation flotation cell can be widely used in the mineral classifications of non-ferrous metals, black metals, and non-metals.
【Production Capacity】：2～20m³/min
【Product Application】：JJF mechanical agitation flotation cell can be widely used in the mineral classifications of non-ferrous metals, black metals, and non-metals. It is suitable for roughing and scavenging in large and medium flotation plant.
01 Xinhai JJF flotation cell is shallow trough type. The impeller parameter is small with slow rotating speed and low power consumption.
02 The gap between impeller and stator is large. The stator is a cylinder with oval hole, which is conducive to the mixture and dispersion of air and pulp.
03 The height of stator is rather lower than the impellers. The pulp circulation amount is large, up to 2.5 times.
04 The umbrella-shaped perforated dispersion cover of stator can block off the foam layer from the vortex by impeller, to keep the stabilization of pulp surface.
05 The pulp circulation amount is large, up to 2.5 times, which is conducive to the mineralization of ore, reagent and air.
06 Large air inflation amount, good dispersion effect.
07 Suitable stirring degree. The solid particles have a good suspension and unsinkable. Parking without drawing.
08 Large processible granularity range and high recovery rate.
09 Mechanical agitation. Self-air-inflation without self-priming pulp. The ladder configuration between work room is essential (the fall is 300-400 mm).
10 It can be combined with SF flotation cell in combined flotation unit, with SF flotation cell as a slurry suction tank and JJF flotation cell as straight tank.
When the JJF mechanical agitation flotation machine is working, vortexes are generated in the vertical tube and the draft tube. This vortex forms a negative pressure and sucks the air from the air inlet pipe. It is mixed with the pulp sucked by the diversion pipe in the impeller and stator regions.The slurry-gas mixed flow is moved in a tangential direction by the impeller, and then converted into radial movement by the action of the stator, and is evenly distributed in the flotation cell. The mineralized bubbles rise to the froth layer and are scraped out unilaterally or bilaterally to form froth products.
| Model | Effective Volume (m3) | Capacity (m3/min) | Impeller Diameter (mm) | Impeller Revolution (r/min) | Motor Power for Agitation (kW) | Motor Power for Scraper (kW) | Single Tank Weight (kg) |
| JJF-4 | 4 | 2.0~4 | 410 | 305 | 11 | 1.5 | 2303 |
| JJF-5 | 5 | 2.0~6 | 410 | 305 | 11 | 1.5 | 2416 |
| JJF-8 | 8 | 4.0~12 | 540 | 233 | 22 | 2.2 | 4507 |
| JJF-10 | 10 | 5.0~10 | 540 | 233 | 22 | 1.5 | 4820 |
| JJF-16 | 16 | 5.0~16 | 700 | 180 | 37 | 1.5 | 7657 |
| JJF-20 | 20 | 5.0~20 | 770 | 180 | 45 | 1.5 | 8505 |
An air inflation mechanical agitation Flotation Cell with slurry suction（as suction cell of KYF flotation cell).
The BF flotation machine is a self-aspirated mechanical agitation flotation unit with combined slurry suction/non-slurry suction.
SF flotation cell is a mechanical agitation type with slurry suction and air suction.
JJF flotation cell is a air self-suction mechanical stirring floatation cell without slurry suction (Referring to the design of USA wemco flotation machine)
An air-inflation mechanical agitation flotation cell without slurry suction (This type of cell is designed referring to Finland Autoquenpu OK flotation cell).
A bar flotation cell with self-air suction and mechanical agitation
A flotation cell used for coarse and heavy particles.
+8618733132385
+8618733132385
Consult
Message
Email